We’re excited to announce that the latest information is now available on our new site, the Ginesys One Wiki!. Visit the site for up-to-date resources and insights. We look forward to continuing to support you there!">
We’re excited to announce that the latest information is now available on our new site, the Ginesys One Wiki!. Visit the site for up-to-date resources and insights. We look forward to continuing to support you there!

">

We’re excited to announce that the latest information is now available on our new site, the Ginesys One Wiki!. Visit the site for up-to-date resources and insights. We look forward to continuing to support you there!">
We’re excited to announce that the latest information is now available on our new site, the Ginesys One Wiki!. Visit the site for up-to-date resources and insights. We look forward to continuing to support you there!

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

Introduction

In this article we have described the basic understanding and trouble shooting steps for Web Report module , those will help to understand the cause of the problem & its basic understanding to prevent such problem in future. Also it will help to avoid the unnecessary delay of tickets forwarding.

Check List of various common problems and its quick resolution guide are listed in table format below.

Issue Type / Problem Type

What to check / Basic actions

How to check ( Quick Guide )

Remarks

Report is not opening / Home is not opening.

Run Report SYNC

  • Click on Repository tab and then run SYNC.

  • Restart IIS (Follow either step)

    • Open CMD ( in Run as admin privilege), type > IISRESET > Press Enter.

    • Open Windows Services (services.msc), restart the service ‘World Wide Web Publishing Service’

Entries in Ginapps.config for Report configuration

Ensure the following standard entries are present in Ginapps.config file.
Path: \GSL\GINESYS12\Shared\Ginapps.config

<add key="ReportURI" value="/GinesysReportUI/" />
<add key="CustomPort" value="" />

IMPORTANT: If different URL is mentioned as ReportUI and ReportAPI, DO NOT change that. Check accessing those URL for verification and consult with technical team if required.

Verify ReportAPI application

Access ReportAPI URL directly entering in browser. The format of ReportAPI URL is mentioned, change the server name or IP appropriately

http://<Server name or IP>/GinesysReportAPI/Api.asmx

Verify ReportUI application

Access ReportUI URL directly entering in browser. The format of ReportAPI URL is mentioned, change the server name or IP appropriately

http://<Server name or IP>/GinesysReportUI/Admin.aspx

Test Admin Configuration: Data Sources

  • Go to Server > Data > Source

  • For database connection check, Double click on GINESYS. Test Connection String using the icon.

  • For verify Assemblies

Report path test connection under Server tab.

Server tab > General > Main Settings > We can find the Report Path line > Test the Report path.

GinesysWebReprts.xml file is present or not

\GSL\GINESYS12\GinesysReport\ReportUI\Config\GinesysWebReports.xml

Physical Path , AppPool , Standard Folder Security permission of ReportAPI folder.

Verify the physical path of ReportAPI folder and its AppPool from IIS Manager.

Verify the folder Security of ReportAPI folder. Standard set of security should be like :

  1. SYSTEM ( Full Permission)

  2. Creator Owner (Special Permission)

  3. Administrators (Full permission)

  4. Users (Read& Execute , List of Folders , Read , Special Permission)

  5. IIS_IUSRS (Full Permission)

Physical Path , AppPool , Standard Folder Security permission of ReportUI folder.

Verify the physical path of ReportUI folder and its AppPool from IIS Manager.

Verify the folder Security of ReportUI folder. Standard set of security should be like :

  1. SYSTEM ( Full Permission)

  2. Creator Owner (Special Permission)

  3. Administrators (Full permission)

  4. Users (Read& Execute , List of Folders , Read , Special Permission)

  5. IIS_IUSRS (Full Permission)

Report SYNC is not happening

GinesysWebReprts.xml file is present or not.

\GSL\GINESYS12\GinesysReport\ReportUI\Config\GinesysWebReports.xml

Folder Security permission of ReportUI & ReportAPI.

Verify the standard Folder security permission.

  1. SYSTEM ( Full Permission)

  2. Creator Owner (Special Permission)

  3. Administrators (Full permission)

  4. Users (Read& Execute , List of Folders , Read , Special Permission)

  5. IIS_IUSRS (Full Permission)

Report Scheduler service is working

GinesysReportScheduler Service state.

RUN > Services.msc > Find the Report scheduler service > Check is it stopped or not installed.

If GinesysReportScheduler service is not installed then you need to install it. Please follow the below reference for Report Service installation.

Ginesys Reports Installation Guide

eWebReportsScheduler.exe file

Find the below file is present or not from the following path.

<Ginesys Installation_drive>\GSL\GINESYS12\GinesysReport\ReportScheduler\eWebReportsScheduler.exe

eWebReportsScheduler.xml file

Find the below file is present or not from the following path.

<Ginesys Installation_drive>\GSL\GINESYS12\GinesysReport\ReportScheduler\eWebReportsScheduler.xml

Schedule Remoting Host test connection ?

Server > General > Main Settings > Scheduler Settings > Find Schedule Remoting host > test the connection.

Enable Report Scheduling Option is True

Server > General > Main Settings > Scheduler Settings > Find Enable Report scheduling > It should be set as True.

Open CMD with Admin privilege and run the below command.

Type Powershell ( press Enter )

Type below command.

dir <\GSL\GINESYS12\GinesysReport\> -Recurse | Unblock -File

Report Scheduler Mail is not happening / Schedule Report goes to Abend State.

GinesysReportScheduler Service state

RUN > Services.msc > Find the Report scheduler service > Check is it stopped or not installed.

Test mail credentials in SMTP mailer from Launchpad.

Open Launchpad > SMTP Mailer > Click on Stop Service > Click Edit button > Put your credentials & test the smtp details. ( Do not save anything on this window ) .

eWebReportsScheduler.exe file

Find the below file is present or not from the following path.

<Ginesys Installation_drive>\GSL\GINESYS12\GinesysReport\ReportScheduler\eWebReportsScheduler.exe

Check mail settings in eWebReportsScheduler.xml file

Find the below file & check the settings from the following path.

<Ginesys Installation_drive>\GSL\GINESYS12\GinesysReport\ReportScheduler\eWebReportsScheduler.xml

Check SSL settings in eWebReportsScheduler.xml file set as true or false.

The common known ports are used in mail configuration i.e. 587,465,25,995 etc.

SSL ports : 587 , 465

Non SSL ports : 25

If found SSL ports are associated under SMTP server name. SSL tag should be set as true.

NOTE : In Exceptional cases, private mail domain might be configured with 587 port with Non SSL configuration. So ,here we have to set false under SSL tag after testing with settings. It will be act like Non SSL 25 general SMTP port.

Failed to attach mail attachment for Report Scheduler. Then we need to eWebReportsScheduler.exe.config file settings under Runtime tag.

Following tag needs to add under Runtime tag.from the the following path.

<loadFromRemoteSources enabled="true"/>

\GSL\GINESYS12\GinesysReport\ReportScheduler\eWebReportsScheduler.exe.config

Report Scheduler Abended under Report Scheduler Page.

Open CMD with Admin privilege and run the below command.

Type Powershell ( press Enter )

Type below command.

dir <\GSL\GINESYS12\GinesysReport\> -Recurse | Unblock -File

  • No labels