Serial | Dev ID | Issue Tracker | Description |
---|
1 | 1049 | N.A. | 1049 Transporter field is not being updated after selecting Site in Outgoing logisticsModule: Inventory - Logistics - Outgoing - LR Reported Version: 12.6.6 Scenario: 1. Select a customer from the Customer master (Sales & Distribution > Setup > Customers > Customer) and provide a Transporter into it (if the transporter is blank) and do enable the 'Outgoing logistics' option. 2. Select an Un-Managed site (Sales & Distribution > Setup > Customers > un-Managed site) and provide a different Transporter to it. 3. Go to Assign Organization Site and assign that Un-Managed site to that customer and do enable the 'Outgoing logistics' option. 4. Select a Consignee and check the Transporter field is being populated then select any site, the Transporter field is not being updated by the Transporter, as defined in the Site master. |
2 | 1102 | N.A. | 1102 Category 6 field is showing wrong value in Item view pageModule: Inventory - Product definition - Item Hierarchy - Item Reported Version: 12.6.6 Scenario: Create an item through Data import and provide a value in category 6. Observe that category 6 value is being shown wrong value in Item view page.
|
3 | 1131 | N.A. | 1131 Trade Group not getting validated in E-Commerce Fulfilled by Seller via Excel ImportModule: Admin - Utilities - Data Import > Fulfilled by Seller Reported Version: 12.6.6 Scenario: Create an Excel for E-commerce Fulfilled by Seller import where customer details are blank and trade group is set as INTERSTATE. Observe that Excel import is done successfully, with no validation message coming.
|
4 | 1152 | N.A. | 1152 Transfer Document with greater date is getting tagged in LRModule: Inventory - Logistics - Outgoing - LR Reported Version: 12.6.6 Scenario: Go to Inventory > Logistics > Outgoing > LR. Create a LR and provide a date. Observe that Transfer Document with greater date is getting tagged.
|
5 | 1175 |
| 1175 "Data Inconsistency" - Error message is showing while creating Delivery Challan Against Order through Import Excel and it is also created without Item quantityModule: Admin - Utilities - Data Import - DC Against Order Reported Version: 12.6.2 Scenario: Create two Sales Order, first one from Web and second one through Import Excel. Now create one single delivery Challan through Import Excel with the above two orders. Observe that the following error message is being displayed - "Data Inconsistency". and also two Delivery challan is created but one is created without item quantity.
|
6 | 1177 |
| 1177 Unable to change Stock point for 'Reprocess' order in Tag Job Order window of WIP Material TransactionModule: Production - Operations - Process - WIP Material Transaction Reported Version: 12.6.2 Scenario: Create a Job Order with the component item where Job type will be 'Reprocess' . (Component will be issued from Order Assembly item=Component item). Now create a WIP Material Transaction entry where provide all the required values and select the item from order mode. In the Tag Job Order window try to change the Stock Point. Observe that Stock Point can not be changed.
|
7 | 1182 |
| 1182 Transfer document cannot be re-tagged after being untagged from Outgoing LRModule: Inventory - Logistics - Outgoing - LR Reported Version: 12.4.5 Scenario: Create Outgoing LR with a tagged Transfer document. Open the above entry in edit mode and untag the Transfer document. Modify the LR with remarks or quantity field then try to tag the previous document Observe that the system is not showing the same entry.
|
8 | 1187 |
| 1187 Amount is showing wrong in edit mode of Outgoing LR when multiple Transfer Documents are being taggedModule: Inventory - Logistics - Outgoing - LR Reported Version: 12.6.6 Scenario: Go to Inventory > Logistics > Outgoing > LR. After providing all the required values, tag multiple Transfer Documents( For example - In the tagged Transfer Documents, Basic amount, gross amount and the net amount should be different). and save it. Again open it Edit mode. Observe that Amount is showing wrong.
|
9 | 1205 |
| 1205 "An internal error occurred during your request!" - Error message is being shown in both cases where 'INVENTORY ITEM' is set to 'Yes' & stock is 0 and 'INVENTORY ITEM' is set to 'No' in Item master at the time of GRT creationModule: Procurement - Operations - Goods In/Out - Returns Reported Version: 12.6.3 Scenario: For Inventory Item: Create a GRC for an item whose 'INVENTORY ITEM' is set to 'YES' in Item master and stock is 0. Create a GRT against that GRC and click on 'Show Item'. Observe that the following error message is being displayed - " An internal error occurred during your request!".
For Non Inventory Item: Create a GRC for an item whose 'INVENTORY ITEM' is set to 'NO' in Item master. Create a GRT against that GRC and click on 'Show Item'. Observe that the following error message is being displayed - " An internal error occurred during your request!".
|
10 | 1212 |
| 1212 "Cannot save the record: Reason: Supplied TDS rounded amount '1002' does not match with calculated rounded amount '1001' " - error message is shown while saving AP voucher Module: Finance - Operation - AP voucher Finance - Operation - TDS journal Reported Version: 12.6.2 Scenario: 1. Go to an AP voucher. 2. Select Bank or Cash. 3. Select On account YES. 4. Select the ledger. 5. Go to Calculate Amount > select the TDS name. 6. Provide the gross payable value as '1001002'. 7. Save it. 8. Now save the AP voucher. 9. Observe that the above message is displayed. |
11 | 1217 |
| 1217 In AP Voucher, Cheque detail is not getting updated for new cheque numberModule: Finance - Operation - AP voucher Reported Version: 12.6.4 Scenario: Go to Finance > Operation > AP voucher. Provide all the required fields. After selecting Cheque/RTGS option, provide a new cheque number and select ADD button. Observe that cheque detail is not getting updated for new cheque number.
|
12 | 1224 |
| 1224 Vendor/ Customer master showing Others type ledgers Module: Procurement - Setup - Vendors - Vendor Sales & Distribution - Setup - Customers - Customer Reported Version: 12.6.4 Scenario: Go to Finance > Setup > Chart of Accounts > Sub Ledger-Others. Create an Sub Ledger into it. Now go to Vendor or Customer master. Observe that Others type of Sub Ledger is also showing in the list.
|
13 | 1231 |
| 1231 "No site is assigned to this ledger. Please contact your administrator to assign site to make entries." - Error message is showing when a site applicable Credit Journal is modifiedModule: Finance - Operations - Journal - Credit journal Reported Version: 12.6.4 Scenario: 1. Create a Credit Journal and provide a General Ledger whose Site Applicable is 'No'. 2. Save the journal. 3. Open the journal in edit mode and provide a general ledger whose Site Applicable is 'Yes' and save it. 4. Observe that an error message is showing - "No site is assigned to this ledger. Please contact your administrator to assign site to make entries." |
14 | 1239 |
| 1239 Zoom option is not working properly in the Copy Order section of Purchase Order.Module: Procurement - Operations - Order - Purchase Order Reported Version: 12.6.4 Scenario: Go to Procurement > Operations > Order > Purchase Order. After providing all the required values, select 'Copy Order' from item Details option. Then Zoom it above 100%. Observe that it is not working properly.
|
15 | 1241 |
| 1241 Scan Quantity is showing wrong value in Put awayModule: Inventory - WMS - Transactions - Put Away Reported Version: 12.6.4 Scenario: Create a text file with two rows (For example - First rows contains the BARCODE of one item, 1 quantity and a bin name and the second row contains the ICODE of the same item, 1 quantity and same bin name). Now Go to Inventory > WMS > Transactions > Put Away and import that file by using Import CSV. Observe that Scan Quantity is showing wrong (For example - 4 quantity have been shown instead of 2 quantity and 2 columns have been shown instead of one).
|
16 | 1246 |
| 1246 "Reason: Invalid Charge amount for Item : <Item Barcode>" - Error message is shown when item quantity is updated in a GRTModule: Procurement - Operations - Goods In/Out - Returns Reported Version: 12.6.1 Scenario: Create a Normal charge as per below setting. Trade Group : INTER STATE Applicability : Apply this charge for each line item. Chargeability : Add, 0%, Round off to nearest value. (Tick) Other Settings : Consider this charge in Cost of goods purchased.
Go to Procurement --> Operations --> Goods In/Out. Create a GRT with having the above created charge applied and return quantity as 1. Open the same GRT in Edit mode Change the return quantity from 1 to 2 Click on calculate charge Click on Save. Observe that the following error is shown - "Reason: Invalid Charge amount for Item : <Item Barcode>" is displayed upon updating a GRT Quantity.
|
17 | 1248 |
| 1248 "An internal error occurred during your request!" - Error message is showing while Calculating Tax in Franchise (Secondary) & Franchise (Consignment)Module: Sales & Distribution - Retail sale - Store - Franchise (Consignment) Sales & Distribution - Retail sale - Store - Franchise (Secondary) Reported Version: 12.6.4 Scenario: Go to Franchise (Consignment) or Franchise (Secondary). Select Add and provide all the required fields. Scan an item & select calculate tax. Observe that the following error message is being displayed - "An internal error occurred during your request!"
|
18 | 1249 |
| 1249 If multiple Transfer documents are tagged to an Outgoing LR then Amount value showing wrongModule: Inventory - Logistics - Outgoing - LR Reported Version: 12.6.2 Scenario: Go to the Outgoing Logistics module. Provide the all-required value in the document. Open the Tag document window, and tag the multiple documents( Basic amount, gross amount and the net amount should be different in the tag document). Save the entry. Retrieve the entry and open the tag document window. Observe that the value of Amount column is showing wrong (showing the basic value of the document).
|
19 | 1250 |
| 1250 "not a GROUP BY expression ...at line 1" - Error message is showing while trying to upload data to EaseMyGSTModule: Admin - Utilities - Sync to EaseMyGST Reported Version: 12.6.5 Scenario: Go to Admin > Utilities > Sync to EaseMyGST. Select Year, Month, GSTIN number & Return name. Now click on Generate & Upload. After selecting the document, click on Generate button. Observe that the following error message is being displayed - "not a GROUP BY expression at "TTLT.DB_PRO_UPLOAD_EMG_DATA", line 13 at "TTLT.DB_PRO_UPLOAD_EMG_DATA", line 4525 at line 1".
|
20 | 1253 |
| 1253 The adjustable amount is showing wrong when any TDS Journal entry is being tagged in Adjusted TDS Journals of Service Invoice AdhocModule: Procurement - Operations - Service / Expenses- Service Invoice Adhoc Reported Version: 12.6.5 Scenario: Create a TDS Journal against a particular vendor (For example - Vendor A). Create Service Invoice Adhoc for previously created TDS Journal. Now post this entry. Pending TDS journal entry window will open (Only one pending record should be in the Adjustment window). Tag the TDS journal entry. Observe that adjustable amount is showing the wrong .
|
21 | 1254 |
| 1254 Purchase Order Document Report is not getting generated through SMTP configurationModule: SMTP mail Occurrence job : Purchase Order document Reported Version: 12.6.6 Scenario: Create a Purchase Order which is not set applicable. Provide all the required values and save the document. Now configure the SMTP mail for Purchase Order document occurrence job. Observe that Report is not getting generated.
|
22 | 1262 |
| 1262 "An Internal error occurred" - Error is showing while generating multiple E-invoices in E-invoice GeneratorModule: Admin - Utilities - E-Invoice Generator Reported Version: 12.6.6 Scenario: Go to Admin > Utilities > E-Invoice Generator. Provide all the required fields. Then select Generate E-Invoices and Proceed. Observe that the following error message is being displayed - "An Internal error occurred".
|
23 | 1263 |
| 1263 Job Receipt entry generated but not showing in list pageModule: Production - Operations - Process - Job Receipt Reported Version: 12.6.4 Scenario: Go to Job Receipt Module. Create Job Receipt multiple times against Job Order and Order having BoM Qty is defined in decimal places. Save the Last Job Receipt entry with BOM quantity adj qty (.001). Observe that the Job Receipt isn't showing in the list page.
|
24 | 1264 |
| 1264 Manual Item Allocation is taking huge time to allocate the item for the siteModule: Retail Management - Setup - Configure - Manual Item Allocation Reported Version: 12.6.4 Scenario: Go to Retail Management > Setup > Configure > Manual Item Allocation. Select the Site and click on the Add Item button. Now select the some items and try to allocate them. Observe that it is taking huge time.
|
25 | 1265 |
| 1265 Unable to Extinct Route Group while importing item(s) through Import BarcodeModule: Production - Setup - Route Group Reported Version: 12.6.5 Scenario: Go to Production > Setup > Route Group. Select the Route Group name & map the mandatory column. Click on Import Barcode and complete the action. Try to extinct the Route Group. Observe that it can not be done.
|
26 | 1266 |
| 1266 Item population is taking more time while doing from Scan Barcode (F7) optionModule: All modules having Scan Barcode (F7) Reported Version: 12.6.4 Scenario: Go to any transaction entry. Provide the required values. Open the Scan barcode (F7) window. Scan any item. Observe that it is taking more time to populate item.
|
27 | 1267 |
| 1267 "Alternate Group is the same as Component Item's Group. please select a different Group" - Error message is displaying while selecting Item Group in Bill of MaterialsModule: Production - Setup - Manage - Bill of Materials Reported Version: 12.6.4 Scenario: Go to Production > Setup > Manage > Bill of Materials. Provide all the required values. Try to select Item Group. Observe that the following error message is being displayed - "Alternate Group is the same as Component Item's Group. please select a different Group".
|
28 | 1274 |
| 1274"An Internal error occurred" - Error message is displaying while trying to save 'Reprocess' type Job Order Module: Production - Operations - Process - Job Order Reported Version: 12.6.6 Scenario: Go to Production > Operation > Process > Job Order. After providing the all required values, select Job Type as 'Reprocess'. Now select the item from Item Information section. Try to save it without clicking on the 'Generate Component requirement' button. Observe that the following error message is being displayed - "An Internal error occurred" .
|
29 | 1275 |
| 1275 Item population is taking huge time while populating through Document Type in the Item Selection option of Item masterModule: Inventory -product Definition - Item > Action > Manage Reported Version: 12.6.6 Scenario: Go to Inventory > Item > Action > Manage. After clicking on the Select Item option, go to Document section and complete the action. Observe that it is taking huge time to populate item(s).
|
30 | 1276 |
| 1276 System creates and modify the OEM barcode with 'Space' as prefix, in Item Creation /Modification Import classModule: Admin - Utilities - Data Import > Item Creation /Modification Reported Version: 12.6.6 Scenario: Create an Excel file for Item creation or Item modification with OEM barcode with 'Space' as Prefix. Go to Admin> Utilities > Data Import > Item Creation /Modification. Import the Excel file. Observe that the system is allowing to create and modify the OEM barcode with 'Space' as the prefix.
|
31 | 1221 |
| 1221 The payment mode is not being enabled after clicking on Cheque / RTGS button in AR/APModule: Finance - Operation - AR/AP Reported Version: 12.6.4 Scenario: Create an AR/AP voucher. Select Cash/bank. Select the ledger. Provide the amount. Click on Cheque/RTGS. Observe that the cursor is not showing in the payment mode field.
|
32 | 1270 |
| 1270 POS Invoices not being pushed to EMR from POS in some casesModule: EMR Sync Reported Version: 2.6.5 144619 Scenario: Due to some causes (like unavailability of internet connection, slow connection etc.) POS Invoices are not being pushed to EMR from POS in a few cases.
|
33 | 1147 |
| 1147 Tax amount of Sales and Online Sales is not getting matched in 'Item Qty & Amount' and 'Margin Analysis' reportsModule: Online Sale (OMNI Channel) Reported Version: 12.6.5 136585 Scenario: Create some online sale from Third party integration. Observe that tax amount of both 'Item Qty & Amount' and 'Margin Analysis' reports is not getting matched.
|