You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 24
Next »
Policy is the course of action introduced or pursued by an organisation or individual. In Ginesys HO, there are two types of policy - Site Policy and Master Policy.
Site Policy is the policy by which HO can allocate the specific action for particular site. Those action only applicable in that site only. Site Policy always Override (get priority over) Master Policy. For example, Suppose HO allocates 30% discount on specific items for all the stores including a store named 'XYZ' through the Master Policy, but allocates flat 50% discount specially for the store 'XYZ' through Site Policy. Then flat 50% discount will be applicable in the store 'XYZ' only.
This article will describe how to manage Site Policy in Ginesys HO.
Pre-requisites
- The users' role must have access to the Site Policy feature by enabling Add / Modify app operation for the feature in Admin - Security - User - Role through Retail Management - Setup - Manage.
Step-by-step guide
The steps are as follows:
- Go to Retail Management > Setup> Manage > Site Policy.
- Site Policy window will open.
- Click on Add button.
- Policy window will open.
- Put in the Policy Name (mandatory field) and Remarks.
You will get two tabs - Configured User Settings and Configured System Settings.
a. Configured User Settings
Common :
- Allow back dated entry up to (in days) - It allows users to entry the Back Dated data in store if HO provides the value which is grater than zero (0).
- Negative stock checking mode - If the stock of an item is not available, then the user will get a Negative Stock warning message.
- Allow blind session closure - If the value of the policy set as Yes, it allows user to close a session without entering opening and closing amount for the current POS session in emergency situation.
- Allow to run drawer summery report - If the value of the policy set as Yes, it allows to run drawer summery report for the current POS session after closing a session.
- Validity of credit notes (issue against POS bill) in days - How many days from the issue date of the credit note, issued against POS bill, remains valid.
- Validity of credit notes (issue against other bill) in days - How many days from the issue date of the credit note, issued against other bill (Gift Voucher bill etc.), remains valid.
- Display transaction rate - If this policy value set as Yes, then the users will be allowed to view rate and amount values at various back office transaction modules.
- Accept quantity in multiple of sale factor only - If this policy value set as Yes, then the users will be forced to accept quantity in multiple of sale factor specified in Item definition. Otherwise they can sale the item out of sale factor.
Delivery Slip and POS Bill :
- Number of copies of Sale Bill to print - POS will automatically print the specified number of copies of a Sale (no return item present) Bill.
- Number of copies of return / Exchange Bill to print - POS will automatically print the specified no. of copies of a Return / Exchange (any return item present) Bill.
- Number of copies of Delivery slip to print - POS will automatically print the specified no. of copies of a Delivery Slip.
- Allow item level discount - If this policy value set as Yes, then the users will be allowed to give the Item Level discount.
- Maximum allowable discount percentage - User will be allowed to provide manual discount (Item/Bill level) up to the given percentage limit.
- Maximum allowable discount amount - User will be allowed to provide manual discount (Item/Bill level) up to the given amount limit.
- Allow to clear promotion - If this policy value set as Yes, then the users will be allowed to clear/resume both item level & bill level promotions.
- Allow adhoc return without sale bill reference - If this policy value set as Yes, then the users will be allowed to return item without sales bill as reference.
- Sale person tagging mandatory - If this policy value set as Yes, then users will be restricted from saving the bill/delivery slip if sales person is not tagged in any Item.
- Customer selection mandatory for POS bill - If this setting set as Yes, then with every POS bill users have to select customer.
- Bill expiry for item return (in days) - Bill will be expired after the specified number of days from its creation date and it will not be considered for return purpose.
- POS return reason entry required - If this policy value set as Yes, then user will be forced to provide a reason while taking a return for any item in POS Bill.
- Allow cash refund - If this policy value set as Yes, then it allow user to refund cash to the customer in time of return items. Otherwise the concern person of the store will give the credit note in time of return item.
- Allow price overwright - The users will be allowed to edit price of a bill item.
- Allow change the auto adjust credit note amount - If this policy value set as Yes, then the users will be allowed to modify the automatically adjusted credit notes amount in case of POS Order tagging in POS Bill.
- Allow back dated reprint for POS bill up to (in days) - Users will not be allowed to take back dated reprints of POS bills after specific number
of days. - Allow to add customer in POS bill modification after settlement - If this policy value set as Yes, users will be allowed to be add customers in POS Bill Modification for accumulating loyalty points for the bill.
- Allow mode of payment modification - If this policy value set as Yes, the user will be allowed to modify the mode of payments.
- Allow to void POS bill in which the credit note was issued - Users will be allowed to Void the POS Bill against Credit Note issued if this policy value set as Yes.
- Void Bill reason entry required - If this policy value set as Yes, then on voiding POS Bill, users have to provide Valid Reason.
- Allow void bill printing - If this policy value set as Yes, users will be allowed to print void bill.
- Allow void delivery slip printing - If this policy value set as Yes, users will be allowed to print void Delivery Slip.
Goods Receive & Return :
- Short Goods Receive Tolerance % - Users will be allowed to make short entry upto specified tolerance %.
- Excess Goods Receive Tolerance % - Users will be allowed to make excess entry upto specified tolerance %.
- Allow damage Goods Receive - User will be allowed to receive damage quantity in Goods Receive Document if this policy value set as Yes.
- Allow packet reconciliation in goods receive - User will be allowed to receive items packet wise if this policy value set as Yes.
- Packet creation mode - From this settings HO can decide in which mode the packet will be created. The mode mode can be Adhoc or against GRT.
- Restrict goods return entry - HO can restrict the goods entry into the site for particular reason.
- Settle with overdue GRT Advice - Action to perform when overdue GRT Advice found while settling a date.
Other Bills :
- Number of copies of Refund Bill to Print - System will automatically print the specified no. of copies of a Refund Bill.
- Number of copies of Deposit Bill to print- System will automatically print the specified no. of copies of a Deposit Bill.
- Number of copies of Gift Voucher Issue to print - System will automatically print the specified no. of copies of a Gift Voucher Bill.
- Customer selection mandatory for Deposit / Refund bill - If this policy value set as Yes, then users have to select the customer for Deposit / Refund bill.
- Customer selection mandatory for GV issue - If this policy value set as Yes, then user have to select the customer for Gift Voucher Issue.
- Allow discounting in Gift Voucher issue - Users will be allowed to issue Gift Voucher at Discounted Value if this policy value set as Yes.
- Void Deposit Bill reason entry required - Users will be forced to provide a reason for voiding the Deposit Bill if this policy value set as Yes.
- Void Refund Bill reason entry required - Users will be forced to provide a reason for voiding the Refund Bill if this policy value set as Yes.
POS Order :
- Number of copy of POS order to print - System will automatically print the specified no. of copies of a POS Order.
- Due date mandatory in POS Order - Users will be forced to provide due date in POS Order if this policy value set as Yes.
- Minimum percentage of advance against POS order - Users will not be allowed to save POS Order if specified percentage of order value is not received in advance from the customer.
- POS Order cancellation reason entry required - If this policy value set as Yes, then the users will have to provide a reason for cancelling the POS Order Items.
b. Configured System Settings
- Data Synchronization Schedule - Data synchronization will take place as per specified schedule.
- Application Update Schedule - Application update will take place as per specified schedule.
- Full Backup Threshold - From this policy HO can set maximum allowable days without full backup POS can run.
- Pending Settlement Threshold - HO can set maximum possible unsettled days in this policy.
- CRMRFID Service - HO can enable or disable integrated RFID Service for Loyalty Cards.
- Footfall for the day entry required - Footfall is the number of customers who visit the store per day. Ho can decide the store will count the Footfall number or not.
- Allow to specify Audit Book Stock Date manually - Users will be allowed to enter and modify Book Stock Date in Audit Journal if this policy value set as Yes.
- PAN no is mandatory in POS bill for specified bill value - User will be asked to tag a customer (with PAN No.) if the bill value is equal to or more than the provided value.
- OTP authentication is mandatory for credit note adjustment in POS transaction - This will enable or disable OTP validation at the time of credit note adjustment in POS transactions.
- Promotion applicability on POS order item in POS bill - System will apply promotions on POS order items in POS bills (at the time of delivery) as per the setting done here.
- POS function behavior for login, backup, data sync after abnormal shut down - From this policy HO decides the POS function behavior after abnormal shut down.
- Cash Limit for POS Bill in Drawer - User will be asked to drop the cash if the total cash value in the drawer is equal to or more than the provided value.
- Auto Sync on Settlement - Sync will get executed automatically on Settlement if this policy value set as Yes.
- Settle with Open Documents - Action to perform by the site when open documents found while settling a date.
- Number of digit to capture for Credit Card number - From this policy HO decide how many digits are allowed to enter for credit card number.
- Item Service - To view stock point wise item stock in POS.
- Allow Bill value rounding - If this policy value set as Yes, then the users can rounded of the bill value from a decimal value.
- Custom loyalty point redeemer - Loyalty points will be redeemed as per the custom method if defined.
- Is Eazy Rewardz Integrated - From this policy HO decides Eazy Rewardz, the third party application, will be integrated with the site or not.
- Rounding behavior in POS bill - Rounding behavior in POS bill can be configured using this policy.
- Rounding limit in POS bill - This policy would round the bill value by adding/subtracting the value defined in the policy by HO.
- Email Domain for Email2SMS Service Provider - HO decides which Service Provider will work on the particular site.
- Display item image at POS based on - Users will be shown Item Image at store end as per the configuration done here.
7. Change the Policies as per requirement from the Configured User Settings and Configured System Settings tabs.
8. Select the Policy which you want to configure for the site and click on the right arrow (->) to move the selected policy in the Configured Settings area.
9. In the Configured Settings area, you will get four columns - Settings, Value, Can Change, Can Delegate.
10. If you want to remove any configured policy from the Configured Setting area, select the policy and click on the left arrow (<-). Then the policy will be removed from the Configured Setting area.
11. Click on Save & Close button to save the policies for the particular site.
Related articles
-
Page:
-
Page:
-
Page:
-
Page:
-
Page:
Add Comment