mO SharemO Share

We’re excited to announce that the latest information is now available on our new site, the Ginesys One Wiki!. Visit the site for up-to-date resources and insights. We look forward to continuing to support you there!

Release Notes 11.133.6

Owned by Aparajita Basu Roy
Last updated: Apr 09, 2018
6 min read


Control

Release Date

20 December 2017

HO Version11.133.6
POS Version1.133.0
Web Database Compatibility Version1.9
Features & Enhancements02
Bug Fixes20
Navigation

Features & Enhancements

Serial

Dev ID

Idea Tracker

Description
136023

36023 New Installation kit for GINESYS WebREPORTS version 2017.2.1

Module:

GINESYS Web – Reports

Enhancement Summary:

The new installation kit for GINESYS Web Reports version 2017.2.1 has been released and updating to this new kit will allow access to new Web Reports from new modules.

Note: Existing users also need to implement the kit to access the latest developments in Ginesys Web Reports.


Note: Those who have configured the Report Scheduler must keep a backup of the eWebReportsScheduler.xml before updating to GINESYS Web Reports version 2017.2.1

<Ginesys Installation Drive>\GSL\GINESYS12\GinesysReport\Web Reportscheduler\eWebReportsScheduler.xml>

Replace the above file (eWebReportsScheduler.xml) in its previous position after update.

Those who are installing it for the first time should ignore the above note.


To know more please click here. 

236028

36028 Now lock days assigned to users can be seen from the list view of the User master

Module:

GINESYS Web - Admin - Securities - User - Users

Enhancement Summary:

Lock days define the number of days for which the user can make a back dated entry, i.e. if the lock days for an user is 2 days and his system date is 31/12/2017; then he can make a back dated entry upto 29/12/2017 only. He cannot make an entry for 28/12/2017 unless he modifies his system date.

Now the lock days assigned to each Ginesys user can be seen from the list view of the User master, without opening each record individually.


Bug Fixes

Serial

Dev IDIssue TrackerDescription
129250 N.A.

29250 Zero could not be given as discount % factor in Promotion Definition of Quantity based Simple benefit Item level promotion with all Benefit types

Module:

Retail Management - Promotion - Definition

Reported Version:

11.116.0 

Scenario:

1. Define a promotion.

2. Attempt to provide zero(0) as a discount % factor.

3. Observe that it does not allow the promotion to be saved.

Important

Note:
This is to be applied on only Item level Quantity based Simple benefit promotion for all Benefit type i.e. Flat Discount, Buy Pool & Get Pool and allowed for factor value in Discount Type on percentage basis.

234348N.A.

34348 For an item, new RSP Rate should be between the range provided in Article master

Module:

Retail Management - Setup - Price control

Reported Version:

11.131.1

Scenario:

  1. Go to Retail management > setup > Price control.
  2. Provide RSP value against any Item.
  3. Click on save with providing necessary value.
  4. Observe that RSP value is getting saved out of the range provided in Article master for an item.
334884N.A.

34884 Changing the Group in Product Hierarchy is not updating last selected Group name in the Item master

Module:

Ginesys Web - Inventory - Product Definition - Item

Reported Version:

11.131.7

Scenario:

1. Go to Inventory - Product - Group
2. Drag any Section/Department.
3. Drop it into a new Division/Section.
4. Observe that the modified division, section & department for the items in the selected Section/Department are not being displayed.

435309N.A.

35309 Filtered Category values should display in ascending order of alphabet

Module:

Ginesys Web - Inventory - Product Definition - Item

Reported Version:

11.132.0 

Scenario:

1. Click on add or edit Item.
2. Open drop down for any Category.
3. Try to filter the category values.
4. Observe that the filtered values are not showing in ascending order of alphabet.

Note: If 'g' is the searched value in drop down then sequence was 'ga','gb','gab','gac',..... in the list

535462N.A.

35462 Changing Connected site and returning to the previous, is showing all records including store even if the 'Show store data' is ticked or not

Module:

Ginesys Web - Sales and Distribution - Retail Sale - Store - Owned

Reported Version:

11.133.0

Scenario:

1. Open the Sales and Distribution - Owned module.
2. Only HO created records are displayed.
3. Just go to connected site and change to another and move back to the previous site.
4. Observe that all records including store are displayed in the grid, even if Show store data checkbox is not selected.

635709

35709 Quantity must be a multiple of the factor for this item - Error message shown when user trying to reserve any order item wise

Module:

Ginesys Web - Inventory - WMS - Stock Reservation

Reported Version:

11.133.2

Scenario:

1. Go to Inventory > Bin Management > Stock reservation > New stock reservation

2. Create an individual item wise reservation .

3. It was observed that when user tries to provide correct item quantity then an error message - Quantity must be a multiple of the factor for this item is displayed.

735719

35719 When multiple Fulfilled by Seller documents have been selected for GST summary report, the quantities and amounts in those documents are being added together

Module:

Ginesys Web - Sales & Distribution - E-Commerce - Fulfilled By Seller

Reported Version:

11.130.1 

Scenario:

1. Select multiple transactions having multiples items with different GST.
2. Click on the Action button and select Print for all selected transactions.
3. Observe that the GST summary information is showing summed up GST summary for all documents instead of only  for respective document. 

835723

35723 Scheduler service was not executing successfully

Module:

Ginesys LaunchPad - Ginesys Planning - Scheduler service

Reported Version:

11.133.1 

Scenario:

  1. Go to Ginesys LaunchPad > Ginesys Planning > Scheduler service.
  2. Attempt to run the scheduler.
  3. Observe that the scheduler is not working.
935776

35776 User cannot send SMS after a POS Bill Save

Module:

Ginesys Launchpad - SMS Notification

Reported Version:

11.133.4

Scenario:

1. Create POS Bill.
2. Observe that SMS is not being sent to customer's mobile number despite being scheduled.

1035794

35794 Value cannot be null. - Error message displayed when user selecting all pending / all failed / all sent messages

Module:

Ginesys Launchpad - Mail Notification

Reported Version:

11.133.1

Scenario:

  1. Go to Mail Notification. 
  2. Select either all pending / all failed / all sent messages for any action. 
  3. Observe that the Value cannot be null message is displayed.
1135778

35778 Multiple date ranges cannot be added to the grid in Margin Rule Application

Module:

Procurement - Setup - Margin Rule Definition

Reported Version:

11.133.1

Scenario:

1. Go to Procurement > Setup > Margin rule definition >Add/edit mode .

2. Add more than three values in the date grid.

3. It was observed that last added date value got populated in the middle position instead of the last position. Also observe that it displays wrong validation message - Cannot Save record.

1235729

35729 Item population through 'Select Item' is taking a long time to populate the item grid

Module:

Retail Management - Promotion - Assortment - Item population

Reported Version:

11.133.0

Scenario:

  1. Go to Assortment > Item population.
  2. Use Select Item for item population to item grid.
  3. Observe that it is taking a long time to do so.
1335824

35824 Amount in words for total amount showing wrong value

Module:

Ginesys Web - Sales & Distribution - Retail Sale - Franchisee (Secondary)

Reported Version:

11.131.7 

Scenario:

  1. Go to Franchisee (Secondary).
  2. Run the document report.
  3. Observe that the amount in words for total amount showing wrong value.
1435927

35927 Process mode running for infinite time and machine getting 'hanged', when user tries to generate voucher

Module:

Retail Management - Gift Voucher - Voucher Management - Generate

Reported Version:

11.131.1 

Scenario:

1. Create and generate gift vouchers.

2. Observe that the machine gets 'hanged' and the following error message is displayed.

1536067

36067 Issues in Sales Credit note/Sales Debit note

Module:

Sales and Distribution - Outright - Sales Credit note/Sales Debit note

Reported Version:

11.133.5

Scenario:

1. Once document is saved and creating new entry without exit the form, 'Invoice No. LOV showing another invoice in it which is not related to that selected document scheme.
2. Changing Ledger in form level, site ledger posting is not working properly.
3. Sorting should be Datewise Decending order in Sales Invoice LOV.
4. Extinct should be removed from Reason pop up.
1636091

36091 Issues in Purchase Credit note/Debit note

Module:

Procurement - Invoicing - Purchase Credit note/Purchase Debit note

Reported Version:

11.133.5

Scenario:

1. Once document is saved and creating new entry without exit the form, 'Invoice No. LOV showing another invoice in it which is not related to that selected document scheme.
2. Changing Ledger in form level, site ledger posting is not working properly.
3. Sorting should be Datewise Decending order in Sales Invoice LOV.
4. Extinct should be removed from Reason pop up.
1735921

35921 'IS BETWEEN' report filter is not working in Web Report

Module:

Ginesys Web - Report

Reported Version:

11.133.5

Scenario:

  1. Use the IS BETWEEN clause as filter in any report.
  2. Observe that the filter is not getting applied to the data and all records are getting displayed.
1835956

35956 All records are being displayed when a single document number is being used as filter for web document reports related to Pick list

Module:

Ginesys Web - Inventory - WMS - Transactions - Pick List

Reported Version:

11.133.5

Scenario:

1. Tag any web report to the feature (Picklist).
2. Open the Inventory- WMS- Picklist.
3. Select a single document and print the report.
4. Observe that data for all transactions are showing.

1936206

36206 Inventory and Retail Sale document reports tagged to the web reports were not being executed document number wise

Module:

Ginesys Web - Inventory - WMS - Transactions - Put Away - Action (button) - Print

Ginesys Web - Inventory - WMS - Transactions - Take Away - Action (button) - Print

Ginesys Web - Inventory - WMS - Transactions - Stock Reservation - Action (button) - Print

Ginesys Web - Inventory - WMS - Transactions - Bin Adjustment - Action (button) - Print

Ginesys Web - Inventory - WMS - Transactions - Pick List - Action (button) - Print

Ginesys Web - Sales And Distribution - Retail Sale - Store - Owned - Action (button) - Print

Ginesys Web - Sales And Distribution - Retail Sale - Store - Franchise Consignment Sale - Action (button) - Print

Ginesys Web - Sales And Distribution - Retail Sale - Store - Franchise Secondary Sale - Action (button) - Print

Ginesys Web - Sales And Distribution - Retail Sale - E-commerce - Fulfilled By Marketplace - Action (button) - Print

Ginesys Web - Sales And Distribution - Retail Sale - E-commerce - Fulfilled By Seller - Action (button) - Print

Reported Version:

11.133.5

Scenario:

  1. Select a single document for any of the above modules.
  2. Attempt to print a document web report for the same.
  3. Observe that all the documents are getting printed, instead of the selected one.
2036223

36223 Printing logo in web reports could not be done based on the choice reflected for Ginesys Desktop Report

Module:

Ginesys Web - Reports
Procurement - Order Management - Purchase Order
Procurement - Invoicing - Purchase Return Debit Note
Sales and Distribution - Outright - Sales Debit Note
Sales and Distribution - Outright - Sales Credit Note

Reported Version:

11.133.5

Scenario: 

Now, the logo of the company will be printed in web reports based on the choice of printing it in Ginesys Desktop reports.